Webcam & Mic Test
Check your camera and microphone before a call: live preview, resolution, and a level meter. Nothing recorded. 100% free, no signup. Everything runs in your browser.
Loading the tool…
Every video call starts with the same ninety seconds: can you see me, can you hear me, hang on, let me check the settings. I built this so that happens before the call rather than during it. Press Test camera and the page shows exactly what the other side will see, with the resolution the camera is actually delivering. Press Test microphone and a level meter shows whether it is picking you up, whether it is too quiet, and whether it is clipping. If there is more than one camera or mic, a picker lets you try each, which is how you find out that the meeting app has been using the laptop's built-in mic while the good one sat on the desk unplugged.
Nothing is recorded and nothing leaves the device. The camera and microphone are opened only while you are testing, the browser shows its own indicator the whole time, and they are released the instant you press stop. The preview is mirrored by default because that is how everyone is used to seeing themselves, and a button flips it to show the unmirrored view the other end of a call receives, which is a small thing that resolves a surprising number of "why does my text look backwards" questions. If the test passes here and fails in your meeting app, the app is the problem, and the page says so. To keep what the camera sees, the screen recorder can record a window with it in.
How to use
- Press Test camera and allow access when the browser asks. The live preview appears with its resolution underneath.
- If you have more than one camera, pick each from the dropdown to see which is which.
- Press Test microphone and allow access. Speak normally and watch the meter.
- A meter that stays near zero means the mic is muted, unplugged or the wrong device is selected. One that hits the red is too hot: move back or lower the gain.
- If there is more than one microphone, try each. The one you want is usually not the default.
- Press the stop buttons when done. Both devices are released immediately.
Why use our webcam & mic test?
Shows the real output, not a status icon. A green dot in a settings panel says a device exists. A live preview with its actual resolution and a meter that moves when you speak says it works. The difference is the difference between "it should be fine" and knowing. The getUserMedia API is the same interface every meeting app uses, so what works here works there.
Separates your problem from theirs. When someone cannot hear you, it is either your microphone, your meeting app, the connection, or their speakers. A meter that moves here eliminates the first in five seconds and points the investigation at the app or the other end, which is usually where it belongs.
Finds the device the app is quietly ignoring. Laptops have a built-in mic, headsets add another, and an external webcam adds a third. Apps pick a default and people never check. The picker here lists every device by name once permission has been granted, and testing each one is the fastest way to discover that the crisp headset mic has not been the one in use for six months.
Nothing recorded, nothing sent. There is no capture, no upload and no server. The stream exists in the page while the preview is on and is released when it is off. The browser's own camera and microphone indicators confirm it. For a quick check in a hotel room or a shared office, that is the only acceptable design.
Explains the common failures in plain words. Permission refused, no device found, and device in use by another app each produce a specific message with the fix, rather than a generic error. The last one is the most common: a meeting client left running in the background holds the camera, and nothing else can open it until that client is closed. The audio trimmer is the next stop if a test recording from elsewhere needs tidying.
Who is this tool for?
Five minutes before an interview or a client call. Camera on, framing checked, lighting checked, mic level checked, devices stopped. The call starts with a conversation instead of a troubleshooting session.
Setting up a new headset or webcam. Plug it in, open this page, confirm the new device appears in the picker and that it is the one producing the picture or the level. Then set it as the default in the meeting app, knowing it works.
Diagnosing a problem on someone else's machine. Send the link. If the meter moves and the picture appears, the hardware and the browser are fine and the problem is in their app's settings. If it does not, the problem is lower down, and the error message narrows it. No software to install on a machine you do not control.
Checking what a recording will capture. Before using the screen recorder for a walkthrough with narration, confirm the mic level is sensible here, so the first recording is not a silent one.
Frequently asked questions
No. The camera and microphone streams exist only in the page while you test them and are released when you stop. There is no recording, no server and no upload. Your browser shows its own camera and microphone indicator while they are on, and it goes off when you press stop.
Because that is how you are used to seeing yourself, and most meeting apps mirror your self-view for the same reason. The other end of a call sees the unmirrored image. The button under the preview flips between the two so you can check both.
The app has been refused camera permission at the operating system level, or another app is holding the camera. On Windows and macOS, camera access is granted per app in the privacy settings. Closing every other app that might use the camera, then restarting the meeting app, fixes most cases.
The microphone is muted on the device or in the operating system, the wrong microphone is selected, or the headset is not actually plugged in. Try each device in the picker. Many headsets have a physical mute switch on the cable, and that is the first thing to check.
Most built-in laptop cameras deliver 720p, meaning 1280 by 720; external webcams usually offer 1080p. The page asks for 720p by default and shows what the camera actually gave, which can be lower if the camera is older or another app is already using it at a different size.
Browsers hide device names until permission has been granted once, as a privacy measure. Test either the camera or the microphone, allow access, and the real names appear in the pickers.
Yes, for both camera and microphone, in the phone's browser. The camera picker lets you switch between front and rear cameras where the browser exposes them. For screen capture, which phones do not offer to web pages, the screen recorder page explains the alternative.

